Welcome! Log in or Join us

Forums SEGmeter Stream data not updating

Subscribe to Stream data not updating 2 posts, 2 voices , Tagged: segmeter

Reply to topic

Nov 5, 2010 7:34am
31 posts

It may seem I’ve stuffed something up at this end but am having trouble working out what.

The device is obviously going on-line but I am not getting any data in the stream although at first I was getting zeroes.

The sketch is throwing data up to the serial monitor in the Arduino software that looks like

(node sol_adv ? )

(node sol_adv ? (p_1 345.57)(e_1 1.50)(p_2 248.95)(e_2 1.08))

The segmeter is only connected up with 2 current transmitters so the above seems sensible.

As far as I can see I have only changed things in the gateway or configuration lua files to match the webpage e.g. node name and the site.

Can you suggest a couple of troubleshooting steps I could try to get the data to be received by your server?

I have tried adding a new device in a “vanilla” format but this did not work either.

Thanks for any help


Rob Brown (robb01)


Nov 5, 2010 7:35am
555 posts

Hey Rob,

I just had a quick look at your things.
Change the stream names here:
To make sure they match the names from the arduino, i.e, they should be

easy way to do this is to delete your device, and create a new SEGmeter 3 channel from the SEG defaults that will map to what the arduino is outputting!

If you still aren’t getting updates, try opening and saving your site. There is a little memcached issue that this will work around.


Log in to reply to this topic

Forums SEGmeter Stream data not updating

copyright © 2008 Smart Energy Groups pty ltd