2 posts, 2 voices , Tagged: segmeter
Nov 5, 2010 7:34am
It may seem I’ve stuffed something up at this end but am having trouble working out what.
The device is obviously going on-line but I am not getting any data in the stream although at first I was getting zeroes.
The sketch is throwing data up to the serial monitor in the Arduino software that looks like
(node sol_adv ? )
(node sol_adv ? (p_1 345.57)(e_1 1.50)(p_2 248.95)(e_2 1.08))
The segmeter is only connected up with 2 current transmitters so the above seems sensible.
As far as I can see I have only changed things in the gateway or configuration lua files to match the webpage e.g. node name and the site.
Can you suggest a couple of troubleshooting steps I could try to get the data to be received by your server?
I have tried adding a new device in a “vanilla” format but this did not work either.
Thanks for any help
Rob Brown (robb01)
Nov 5, 2010 7:35am
I just had a quick look at your things.
easy way to do this is to delete your device, and create a new SEGmeter 3 channel from the SEG defaults that will map to what the arduino is outputting!
If you still aren’t getting updates, try opening and saving your site. There is a little memcached issue that this will work around.